Power Measurement 7330 ION - I;O Options

 -3297)67+9-()
8LI-32MW*EGXSV]'SRJMKYVIHERH6IEH]XS3TIVEXI
Although the 7330 ION is fully customizable, it is shipped from the factory with
many functions pre-configured. Once installation and basic setup are
performed, all of the basic measurements and energy calculations are ready to
operate, right out of the box. Many users will find that the factory configuration
will serve their purposes without performing any additional configuration.
;LEXW2I[MR*MVQ[EVI:IVWMSR:\
Firmware version 7330V205 and later offers many new and enhanced features,
including new power quality functions, new communications and I/O options,
and more ION module types for advanced applications. PEGASYS version 2.0
includes several enhancements that make the 7330 ION easier to set up and use.
(EXE(MWTPE]ERH(IZMGI'SRJMKYVEXMSR-QTVSZIQIRXW
The most significant change to the 7330 ION in the V20x release is found when
you display data or perform configuration functions with PEGASYS Vista, ION
Designer and the front panel.
The data measured by the 7330 ION is now easier to access and interpret in
PEGASYS Vista. A new set of user diagrams, included on the PEGASYS 2.0
release CD, group most of the factory-configured functions onto five main
screens for real-time measurements, power quality monitoring, energy and
demand calculations, setpoints and digital input status.
6IWMHYEP'YVVIRX'EPGYPEXMSR
The 7330 ION provides a residual current calculation for 4-Wire Wye systems.
This value is derived from the residual current from an unbalanced load, so it
typically represents the current flow in the neutral or ground conductor.
2I['SQQYRMGEXMSRWERH-33TXMSRW
New or improved communications and I/O features include:
♦ Support of DNP 3.0 protocol on all communications ports.
2I[-321SHYPIW
New ION modules are included that provide more options to the advanced
user:
♦ DNP Import, Export and Options modules for DNP 3.0 communications.
♦ Convert modules for converting different types of data.
♦ Feedback modules for creating circular linkages in ION frameworks.