Need help?Do you have a question about the Power Probe The Hook and is the answer not in the manual?
General| Brand | Power Probe |
|---|---|
| Model | The Hook |
| Category | Circuit Tester |
| Language | English |
Details the acceptable voltage range for operation.
Instructions for connecting the unit to the vehicle's power source.
Information about the Y-connector and battery clip components.
Explains the function and testing of the auxiliary ground lead.
Description of the integrated flashlight function.
Explains the automatic sleep mode and how to wake the device.
Understanding the information displayed on the preference line.
How to toggle the audible speaker output on or off.
Adjusting the circuit breaker trip point for protection.
How to perform voltage tests using the Hook mode.
How to perform resistance tests using the Hook mode.
Details on the Arc Detect feature and its limitations.
How to measure duty cycle and frequency.
Measuring positive pulse width and frequency.
Measuring negative pulse width and frequency.
Using the pulse counter for sensor counts.
Details on the circuit breaker's protective function.
Explanation of the thermal overload protection feature.
Warning for voltages exceeding safe operating limits.
How the sleep mode preserves backlight life.
Alarm triggered by deviation from set voltage.
Protection against incorrect hook-up polarity.
Information on fuse protection for clips and ground cable.
To Next Page