12
INSTALLING THE GUN ASSEMBLY
Aim the gun barrel at the hole of the water gun and screw it tightly. Then place the gun assembly on the
hook. Hang the high pressure pipe on the middle tube with the sling.
INSTALLING SIPHONING TUBE
Align the siphoning tube with the water outlet of the soap bottle and the water inlet of the pump body
respectively, and then install them in place.
CONNECT THE GUN AND HIGH PRESSURE PIPE
Align the high pressure pipe with the water inlet on the gun, and tighten the knob on the high pressure
pipe.
To Next Page
Loading...
Need help?
General