11
Off: Fuel off without stop. This position can run out of the remaining fuel and improve the reliability of
the generating set.
Note: If you do not plan to use the generator in the near future, please use this function, or drain the fuel
inside the carburetor through the carburetor drain bolt.
Run: The generating set operates normally.
Choke: Close the choke.
Note: Turn to choke position to start when engine is cold, and turn to Run position to start when engine is
hot.
Circuit breaker
When the generator is overloaded or overheated for a long time, the thermal protector works.
Under protected, please reduce the load or run it for a few minutes without load. Press the thermal
protector button, then output recovers.
Note: The thermal protector is influenced by factors, such as operation current and ambient temperature,
so the protection time varies.
Parallel kit terminal
It used for parallel operation with another inverter (parallel kit sold separately)
To Next Page
Loading...
Need help?
General
