9
Maintain a firm grip with thumbs and fingers encircling the chain saw handles, with both hands on
the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can
be controlled by the operator , if proper precautions are taken. Do not let go of the chain saw.
Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact
and enables better control of the chain saw in unexpected situations.
Follow the sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge
height can lead to increased kickback.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
V
Volts Voltage
Frequency (cycles per second)
Double Insulated Class II construction Double Insulated construction
Safety Alert Precautions that involve your safety.
Read the user’s
manual
To reduce the risk of injury, user must read and understand user’s
manual before using this product.
Ear protection Wear ear protection when operating this equipment.
Eye protection Wear eye protection when operating this equipment.
Withdraw the mains
plug! Unplug before performing any maintenance.
Wear hand and foot
protection
Wear gloves and appropriate closed-toe work boots when operating
the chain saw.
To Next Page
Loading...