REMOTE CONTROL BOX
INSTALLATION AREA
11
Normal working indicator
Remote interface
Connecting wire
Fault indicator
Power switch
(Switch)
1. Before installing the Pure sine inverter, the area or
location MUST meet the following requirements:
DRY - Do not allow water or other fluids to drip or splash on
the Pure sine inverter. DO NOT MOUNT THE INVERTER IN
AN AREA SUBJECT TO SPLASHING WATER AND SPRAY
WATER.
COOL - Normal air temperature should be between 32°F and
104°F (0°C and 40°C)- the cooler the better.
CONTINUED ON NEXT PAGE
To Next Page
Loading...
