Power 6ft - User Manual

Pent Bike Shed Instruction Manual
6ft Models
________________________________________________________________
WARNING
UNPACKING SAFELY
Please follow these instructions to unpack your garden building safely
• Two people minimum to unpack
• Place the pallet on firm level ground
• Cut the plastic banding
• Remove each panel by removing screws one column at a time as indicated below
• Be careful of loose components inside the pack when removing panels
• Check all the components against the checklist prior to install
]
______________________________________________________________
BASE KIT AND FIXING PACK
Please note – if you have ordered a base kit it’s unlikely you will be able to see the base kit from
the outside of the pack - it will be inside your panels. The fixings are also inside the pack.

Summary

Unpacking Safely

Product Overview and Video Guide

Pre-Assembly Safety and Tools

Health and Safety Precautions

Essential safety advice, including wearing protective gear and manufacturer liability.

Tools and Timber Treatment

List of required tools and information on timber treatment and chemical warnings.

Base Installation Guidance

Power Base Kit Details

Information about the optional base kit and a link to its installation video.

Shed Component Checklist

Fixing Pack and Pre-Assembly Steps

Drilling Recommendations

Recommendation to pre-drill holes to prevent timber splitting during assembly.

Floor Assembly Instructions

Wall Panel Assembly

Front Top and Gable Attachment

Roof Panel Installation

Door Hanging and Securing

Roof Felt Application Guide

Finishing Touches

Shed Aftercare and Maintenance

Share Your Shed

Invitation to share photos of completed sheds on social media channels.

Shelving Unit Installation

Returns and Contact Information

Power 6ft Specifications

General

Brand	Power
Model	6ft
Category	Storage
Language	English