3
General Safety Warnings
General safety
General safety
Important - Please read these instructions
fully before starting assembly.
IMPORTANT!
When using equipment, the following safety
precautions must be followed to avoid injuries
and damage:
• Read all operating instructions carefully and
comply with them. It is important to understand
these instructions and to acquaint yourself with
the machine, its correct usage and all safety
requirements.
• Keep this manual in a safe place so that the
information is available to the operator at all
times.
•
If you give the equipment to any other person,
give them these operating instructions as well.
We accept no liability for damage or accidents
which result from non-compliance with these
instructions.
NOTE: Only supply power to the equipment
through a circuit protected by an RCD with a
maximum trip current of 30mA.
• Use only plugs or connectors approved for
outdoor usage.
• Extension cables must comply to H05VV-F
To Next Page
Loading...
