26
Maintenance and Storage
INJURY WARNING: Always wear protective gloves when
working on or around cutting equipment.
When not in use, in transit or storage, always install transport
protection on all cutting machine.
Before performing any maintenance or cleaning work, always turn
off the engine and pull out the spark plug boot.
1. Do not spray the unit with water. It damages the engine.
2. Clean the unit with a cloth or hand brush, etc.
Maintenance schedule
12 hours of use 24 hours of use 36 hours of use
Air filter clean clean replace
Spark plug check clean replace
Expert examination required:
- When the brush cutter hits an object.
- When the engine suddenly stops.
- If the blade is bent (do not straighten yourself!)
- If the gearbox is damaged.
Regular checks
Keep in mind that the following specifications relate to normal
usage. Owing to circumstances (longer periods of daily work,
severe dust exposure, etc.), the specified intervals will become
correspondingly shorter.
Before the start of work and after refuelling:
Check if cutting tools are positioned securely, examine the
product for any signs of damage or deterioration, and sharpen the
cutting blade.
Weekly inspection:
Lubrication of gear.
To Next Page
Loading...