14
Assembly
WARNING!
Take care when removing the packaging to prevent
damage to the machine.
Make sure that you have sufficient space to put the
machine down. Keep your feet apart so that you have a
stable position; bend at the knees and keep your back
straight.
Always recycle the packaging in accordance with local
recycling schemes.
When assembling this machine, please follow these
instructions.
Assemble the handle on the machine
1. Assemble the upper handle
Assemble the bike type handle on the machine:
a) Release the inner hex screws,
b) Take the right and left handle to the centre of the handle holder,
c) Assemble the handle holder and tighten the inner screws.
ATTENTION! Make sure the spring is in position.
To Next Page
Loading...