7
b. After each period of operation, exercise
to increase blood circulation.
c. Take frequent work breaks. Limit the
amount of exposure per day.
d. Keep the cutter well maintained,
fasteners tightened and worn parts
replaced.
• If you experience any of the symptoms of
this condition, immediately discontinue
use and see your doctor.
• Mix and store fuel in a container approved
for petrol clearly identified as 2-stroke.
• Mix fuel outdoors where there are no
sparks or flames. Wipe up any fuel
spillage. Move 10m (30ft.) away from the
refuelling site before starting the engine.
• Stop the engine and allow it to cool before
refuelling or storing the unit.
• Before transporting in a vehicle, allow the
engine to cool, empty the fuel tank and
secure the cutter from moving.
• Replace the string head if cracked,
chipped, or damaged in any way. Be sure
the string head is properly installed and
securely fastened. Failure to do so can
cause serious injury.
• Make sure all guards, straps, and handles
are properly and securely attached.
• Use only the manufacturer’s replacement
string in the cutting head. Do not use any
other cutting attachment. To install any
other brand of cutting head to this string
cutter may result in serious personal
injury.
To Next Page
Loading...