9
• Always carry the machine by its handle,
keeping a safe distance from the blade to
avoid the risk of injury.
WARNING! Sharp blades! Take extra
care to avoid injury by the rotating
blades.
• Never cross any gravel roads or paths
whilst the machine is running.
•
Maintenance
WARNING! Switch off the engine
before carrying out any work. Wait until
all rotating parts have stopped and the
cutter has cooled down.
1. Repairs and works specified in these
Instructions may only be performed
by qualified authorised staff. Use only
original accessories and spare parts.
2. Keep the cutter clean at all times, in
particular the air vents. Never spray
water on the cutter body! Never clean the
cutter and its components with solvents,
or flammable or toxic liquids. Use only a
damp cloth.
3. Check the cutting equipment function.
4. Only a regularly maintained and well
treated cutter can serve as a satisfactory
aid. Insufficient maintenance and care
can lead to unforeseen accidents and
injuries.
To Next Page
Loading...