23
NOTE: Do not use force when installing the battery pack.
If the battery pack does not slide in easily, it is not being
inserted correctly.
WARNING : Verify that the switch is in the OFF position
before inserting or removing the battery pack.
WARNING : Verify that the battery pack is removed and the
switch is in the OFF position before inspecting, adjusting or
performing maintenance on any part of the chain saw.
WARNING : Read, understand and follow the instructions
contained in the section entitled charging procedure.
NOTE: This tool will only work when 2 batteries are installed.
And recommended to use the same two batteries and
charge at the same time. If use two batteries with different
power, the tool is only working to the lower battery power.
To Next Page
Loading...
