1. Never allow the battery to completely
discharge before recharging. The battery
pack should be placed on the charger
whenever the battery pack is noticeably
running down or the tool no longer performs
a task it previously performed.
2. Avoid conducting short charges. Make
sure that the battery is fully charged each
time by allowing the charger to complete its
full charging cycle.
3. Avoid allowing loose items like screws or
nails, etc., to be stored with battery packs, as
these or similar items can short battery
packs and cause a fire or explosion.
4. Always unplug the charger when not in
use and store in a dry and secure place.
5. Avoid charging or storing your battery in
temperatures below 5°C and above 45°C.
6. After use, allow the battery to pack to cool
down for approximately 30 minutes before
attempting to recharge.
Warning! Don’t allow any liquid to get
inside the charger; May result in electric
shock. To facilitate the cooling of the
battery pack after use, avoid placing the
charger or battery pack in a warm
To Next Page