The PowerBass Xtreme XL-1200 is an amplified soundbar designed for powersports applications, offering high-fidelity sound in various environments. It features a splash-proof design and a military-grade aluminum chassis, ensuring durability and resistance to harsh conditions. The soundbar is equipped with Bluetooth connectivity for wireless audio streaming and includes wired AUX inputs for alternative audio sources.
Function Description:
The XL-1200 is a full-range Bluetooth speaker system that provides amplified audio output. It can be used as a standalone sound system or integrated with other audio components. The soundbar's primary function is to deliver high-quality audio from Bluetooth-enabled devices or wired auxiliary sources. It includes an internal amplifier, eliminating the need for an external amplifier for basic operation. The soundbar is designed for easy installation in vehicles, particularly off-road vehicles, and offers various mounting options.
Important Technical Specifications:
- Model: XL-1200
- RMS Power (watts): 500
- Peak Power (watts): 1000
- Aux Input Sensitivity: 250mV - 3 Volts
- Aux Output: 2 Volts (variable output, controlled by the soundbar pre-amp)
- Frequency Response: 50Hz - 22kHz
- Signal to Noise Ratio: >85dB
- Bluetooth Frequency: 2.4GHz
- Bluetooth Protocol: V4.0
- Bluetooth Operating Range: >32 feet
- Bluetooth Compatible Devices: A2DP Support
- Size (L x H x W): 33.75 x 4.7 x 4.4 inches (857 x 119 x 111 millimeters)
- Weight: 16.8 lbs (7.62 kgs)
- Woofers: 3.5" x 6 Premium Marine Grade Poly Cone Woofers
- Full Range Speakers: 3" x 2 Premium Marine Grade Poly Cone Speakers
- Tweeters: 1" x 4 Premium Marine Grade Mylar Dome Tweeters
- Amplifier: 400 Watt RMS Quad Bridged Mosfet Power Amplifier
- Electrical System Compatibility: 12-volt Negative ground electrical systems only.
Usage Features:
- Audio Inputs: Bluetooth for wireless streaming and wired 3.5mm AUX input for connecting devices like cell phones or MP3 players.
- Audio Output: A 3.5mm AUX output provides up to 2 volts to drive an external amplifier (for subwoofers or full-range speakers) or a second soundbar. This output is variable and controlled by the main soundbar's pre-amp.
- Controller Layout: The soundbar features an integrated controller with buttons for:
- Power/Mute/Pause: Press and hold for 3-5 seconds to power on/off. Momentary press to pause/un-pause music in Bluetooth mode or mute/un-mute in AUX mode.
- Volume Up/Down: Momentary press to adjust volume. An audible beep indicates maximum volume.
- Bluetooth / AUX Button: Momentary press to switch between Bluetooth and auxiliary input. Press to pair a Bluetooth device if none is currently paired.
- Track Forward/Back: Momentary press to skip to the next/previous song (Bluetooth mode only). These functions do not work in AUX mode.
- Reset Button: Press and hold for 3-5 seconds to reset the micro-processor.
- Bluetooth Pairing: To pair, turn on the soundbar, press the Bluetooth button, and search for "XL-1200" in your device's Bluetooth settings. An audible beep confirms successful pairing.
- Optional External Controller (XL-SBCON): A dash-mount controller is available separately for fingertip control of the soundbar.
- Mounting Options:
- L-brackets: Supplied hardware for mounting the L-bracket to the soundbar at a desired angle. The L-bracket has a 0.25-inch hole for mounting to the vehicle (vehicle mounting hardware not supplied).
- C-clamp bracket (optional): Available separately (XL-SBCLAMP, XL-SBSCLAMP, XL-SBTCLAMP) for mounting to square or round tubes. Features a set screw to lock it into the soundbar and comes with two screw sizes for different bar sizes.
- Auto-Turn Off Circuit: To prevent battery drain, the soundbar automatically turns off after 10 minutes of non-activity. To resume playback, simply press the Power Button.
- Protection Circuit: A Red L.E.D Protection Light illuminates if the soundbar detects over or under voltage, indicating the activation of a built-in protection circuit.
Maintenance Features:
- Water-Tight Housing: Heavy-duty extruded aluminum housing provides heatsink cooling and a waterproof sealed environment, protecting internal components from environmental elements.
- Corrosion Resistance: The supplied stainless steel hardware is chosen to resist rust and corrosion. If alternative hardware is needed, only appropriate marine-grade (stainless steel) mounting hardware should be used.
- Battery Drain Prevention: The Auto-Turn Off Circuit helps prevent battery drain when the unit is not in use.
- Troubleshooting Tips: The manual provides guidance for common issues such as no power, no sound, distorted output, sound cuts on/off, inability to pair Bluetooth, and the red protection LED being on. These tips include checking wiring, input signals, Bluetooth settings, and input voltage.
- Professional Installation Recommended: Due to the detailed knowledge of electronics wiring required, installation by an authorized PowerBass dealer is strongly recommended to ensure proper setup and prevent damage.
- Warranty: The product comes with a limited warranty, covering defects in material and workmanship for one year, extended to two years if installed by an Authorized PowerBass Xtreme Dealer. The warranty does not cover damage from abuse, improper installation, or unauthorized repairs.
Need help?
General
To Next Page
