What to do if I am not able to pair Bluetooth device with PowerBass Speaker System?
If you are unable to pair a Bluetooth device with your PowerBass Speaker System, verify that no other device is currently paired, as only one device can be paired at a time. Also, ensure that Bluetooth is turned on from your device.
How to troubleshoot no power on PowerBass XL-1250 Speaker System?
To troubleshoot a PowerBass Speaker System with no power, use a volt meter (VOM) to check the wiring. The red and blue wire should read +12 to +16 VDC, and the black wire should read -12 to -16VDC.
How to fix distorted output on PowerBass XL-1250 Speaker System?
To resolve distorted output on your PowerBass Speaker System, first, check the input signal to ensure it does not exceed 3 volts. If it does, reduce the volume on either the soundbar or the connected device.
What to do if sound cuts on and off on PowerBass XL-1250 Speaker System?
If your PowerBass Speaker System is cutting the sound on and off, check the input signal. Ensure your input signal is at least 250mV. If it's too low, raise the volume on either the soundbar or the connected device.
Why is there no sound coming from my PowerBass XL-1250?
If your PowerBass Speaker System has no sound, check the input device. Ensure your device is paired with the sound bar and that you are connected to the AUX input cable.
General| Type | Subwoofer |
|---|---|
| Power Output | 1250W |
| Impedance | 4 Ohms |
| Driver Size | 12 inches |
| Peak Power | 1250W |
| Voice Coil | 2.5 inches |
| Cutout Diameter | 11.125 inches |
Details on woofers, speakers, tweeters, DSP, housing, inputs, output, and mounts.
Lists specific components and power ratings for each soundbar model.
Advice on reading instructions, safety, wiring, and connector quality.
Lists tools, hardware, and safety measures for installation.
Details on mounting methods, location, and power/signal connections.
Explanation of AUX input and output connections and functionality.
Overview of the controller layout and button operations.
Instructions for pairing devices via Bluetooth and the wireless remote.
To Next Page
