PowerBox Systems PowerBox 40/24 Champion - User Manual

Operating Instructions
Operating Instructions
Brief description of the PowerBox 40/24 Champion
Petty patent No.: 203 13 420.6

PowerBox Systems PowerBox 40/24 Champion Specifications

General

Current Drain On	25mA
Drop-out Voltage	0.3V
Temperature Range	-30°C to +85°C
Input Voltage	4.0V to 9.0V
Output Voltage	5.9V / 7.4V
Power Supply	2S LiPo
Signal Input	PWM, S.BUS
Supported Telemetry Systems	Futaba, Jeti, Multiplex

Summary

PowerBox Champion 40;24 Introduction

Brief Description of PowerBox 40;24 Champion

Provides a summary of the PowerBox 40/24 Champion features and capabilities.

PowerBox Champion 40;24 Initialisation

Preparation and Initialisation Steps

Covers connecting components and the initialisation steps for Channel A.

PowerBox Champion 40;24 Channel Setup

Initialising Channels B and C

Details the initialisation process for channels B and C, including reset procedures.

Adjusting Servo Centre and End-Points

Guide to setting servo centre points and travel limits for accurate operation.

PowerBox Champion 40;24 Servo Configuration

Setting Servo Travels and Fine-Tuning

Instructions for setting precise servo travel, fine-tuning multiple servos, and their benefits.

PowerBox Champion 40;24 Final Notes

Adjustor Board Disconnection and Best Practices

Advice on disconnecting the Adjustor Board and final operational tips.