www.modellmarkt24.ch
2 PowerBox-Systems − World Leaders in RC Power Supply Systems
Dear customer,
We are delighted that you have decided to purchase the SparkSwitch from Power-
Box-Systems.
The SparkSwitch is a reliable high-performance ignition switch. The entire design
of the SparkSwitch has deliberately been kept simple, whilst retaining all the im-
portant functions. The ignition switch is ready for use as supplied, and requires no
set-up procedure. All you have to do is set up your radio control transmitter for use
with the switch.
Please read right through these instructions, as they are designed to make you fully
conversant with your new switch unit in a very short time.
PowerBox SparkSwitch.
- Input voltage 4.0 - 9.0 V
- Regulated output voltage 5.9V, 7.4V or 12.0V
- Max. output current 2 A, peak 4.5 A
- External LED power-on monitor
- Power circuits isolated by opto-coupler
- Two different switching modes
- Current drain at receiver: 2 mA
- Current drain at switch side, power-on: 19 mA
- Current drain at switch side, power-off: 0.2
μμA
- Fail-safe mode
www.modellmarkt24.ch