3
Precautions for safety
| Tips for installation
The appliance shall be installed in accordance with
national wiring regulations.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
If a problem occurs with the product, turn it off
immediately and contact the dealership or customer
service center.
(Otherwise, it may cause damage and explosion of
the product as well as injury.)
Unpacking and installation shall be done at a flat
and safe place.
(Otherwise, it may cause malfunction of the product
or injury.)
After installing and repairing the product, be sure to
check for leaking of refrigerant.
(Otherwise, it may cause failure of the product.)
When installing the product, be sure to level it.
(Otherwise, it may cause vibration, noise,
and malfunction of the product.)
※ The details in parentheses indicate potential damage of the product or safety accidents that may occur when the
precautions in this manual are not observed.
To Next Page
Loading...