Cause Solution
Battery is defective. Replace battery.
Blown fuse. Ask for help from technician.
Loose cable connections.
Check the connection to the battery.
Tighten as required.
Cause Solution
The actual output power is higher
than rated power of inverter, overload
protection has occurred.
Reduce load to have the actual output
lower than rated power of inverter.
The actual output is less than rated
power, but high starting surge has
caused overload shutdown.
Use a product with starting surge
power within the inverter’s capability.
The voltage input is too low. Charge the battery.
Inverter is overheated due to poor
ventilation and has shut down.
Disconnect the inverter from battery
or DC socket and allow to be cooled
for 15 minutes. Please ensure to
remove objects covering unit.
To Next Page
Loading...
Need help?
General
