22
TIP SEAL SET REPLACEMENT
every 5,000 HOURS – MAINTENANCE (High pressure model)
10,000 HOURS – MAINTENANCE (Regular pressure model)
1. CONFIRMATION OF THE PARTS
i. Confirm if the Tip Seal you purchased is correct for the air end you are replacing (see below parts listing).
WARNING
Per OSHA regulations, ALL power must be
locked out before performing any maintenance.
CAUTION
This service should be performed by an authorized
Powerex Service Center to avoid failure.
Tip Seal Set
SLAE03E SLAE05E SLAE05EHP
92834090 92832070 92832080
To Next Page
Loading...
