Powerfix Profi KH 2927-1 User Manual

Items supplied
• Ultrasonic Distance Meter
• 9V battery
• Operating Instructions
Unpacking
Remove the Ultrasonic Distance Meter from the packaging.
Remove all transport restraints and packaging materials.
Remove the protective foil from the display w.
Device description
1 Laser emission opening
2 Ultrasonic sender/receiver
3 Temperature sensor
4 FT/M button
5 RECALL button
6 Measurement point
7 Battery compartment
8 Spirit level
9 MODE button
0 ON/OFF button
q READ button
w Display
Inserting the battery
1. Open the battery compartment 7 at the rear of the
Ultrasonic Distance Meter.
2. Place the 9V block battery onto the contacts.
Pay heed to the correct polarity.
3. Lay the 9V block battery into the battery compartment 7.
Warning:
Ensure that the wires are not trapped in any way. This could
irreparably damage the appliance.
4. Close the battery compartment 7. The battery
compartment lid must audibly engage.
- 4 -

Powerfix Profi KH 2927-1 Specifications

General

Brand	Powerfix Profi
Model	KH 2927-1
Category	Analytical Instruments
Language	English