Powerfix Profi PEK 2.3 A1 User Manual

PowerFix PEK 2.3 A1
8 - English
If liquid has leaked, follow the instructions below:
 If the liquid comes into contact with your skin, wipe it off with a clean
cloth and rinse the area of contact with a large amount of water.
Consult a doctor if necessary.
 If the liquid comes into contact with your eyes, rinse them with running
water for at least 15 minutes and then go to a hospital immediately.
Consult a doctor if necessary.
 If you swallow the liquid, first rinse your mouth with water, then drink a
large amount of water and induce vomiting. Go to a hospital as soon as
possible. Consult a doctor if necessary.
Operational safety
Ensure that the device is not subject to extreme temperature fluctuations, since
this could result in condensation and electrical short circuits. If the device was
subjected to extreme temperature fluctuations, however, wait (approx. 2 hours)
until the device has reached ambient temperature before use.
Batteries
Always ensure correct polarity of the batteries. Please note the markings on the
batteries and in the battery compartment. Never try to recharge batteries and
never throw them into an open fire. Never use different batteries (old and new,
alkaline and carbon, etc.) at the same time. Remove the batteries if you will not
be using the device for an extended period of time. In the event of improper
use, there is a risk of explosion and leakage.

Powerfix Profi PEK 2.3 A1 Specifications

General

Brand	Powerfix Profi
Model	PEK 2.3 A1
Category	Analytical Instruments
Language	English