Powerfix Profi PEKK 4.3 A1 - Installing Accessory Tools; Storage Recommendations

PowerFix PEKK 4.3 A1
54 - English
5.4.8 Installing the tools
The following tools/holders are supplied with the device:
Magnet [C] Hook [D]
Double hook [E] Mirror [F]
Tool holder [G]
Place the small barbed hook of the tools in the
opening at the end of the goose neck, just
below the camera head [10].
Note: For the magnet and the double hook, the tool holder must be pushed
onto the attachment beforehand because of its size.
Carefully slide the tool holder completely over
the camera head [10]. Make sure that the
attachment is in the insertion recess of the tool
holder.