To Next PageTo Next Page
Need help?Do you have a question about the PowerFleet VAC4S and is the answer not in the manual?
Provides information on the proper use and maintenance of the PowerFleet Enterprise Vehicle Management System.
Illustrates the PowerFleet Enterprise System components including VAC, WAM, and Access Point.
Details the VAC's LCD screen, keypad, ID reader, and status indicator LEDs.
Explains how to navigate VAC menu, data input, and multiple choice selection screens.
Describes iButton ID Fobs and Access IDs for operator login and vehicle access.
Step-by-step guide for configuring the VAC, including vehicle type and engine settings.
Procedures for configuring VAC Wi-Fi credentials and connecting to wireless networks.
Explains wireless synchronization via IRF and Wi-Fi, and WAM credential transfer.
Details the three steps for setting up the impact sensor system.
Covers logging into the VAC, answering safety checklists, and logging off.
Describes Break Mode, Idle Timeout, and Automatic Hibernate functions.
Details functions like adding temporary users, clearing lockouts, and manual vehicle control.
Guides on WAM LED indicators and troubleshooting common WAM issues.
Provides guidance on common VAC issues, cable pinouts, and LED indicators.
Covers troubleshooting for Sensor Hub connection, power, and firmware issues.
Explains error categories (Shutdown, Functional, Reference) and their screen displays.
Details electrical, processor, memory, and communication specifications for VAC4S/VAC4.
Lists specifications for Intelligent RF, Wi-Fi, and Bluetooth protocols.
Covers VAC keypad, display, mounting, and environmental operating conditions.
Outlines procedures for customer support, warranty, and return merchandise authorization.
General| GNSS | GPS, GLONASS, Galileo, BeiDou |
|---|---|
| Internal Battery | Lithium-ion |
| Accelerometer | 3-axis |
| Output Voltage | 12V DC |
| Protection Features | Over-voltage protection, short-circuit protection |
