INSTRUCTIONS MANUAL SMART 3000
RELEASE. N.2_M 13_10_08
POWERGEN S.R.L. VIA XXV APRILE, 5 LOC. CORSALONE CHIUSI DELLA VERNA (AREZZO)
) +39-(0)575-531015 - Telefax +39-(0)575-511891 E mail borri@elledi.it
www.batterychargerpowergen.it P.Iva 01572290516 - 6 -
3. MAINS VOLTAGE SETTING
q During the installation (or after a displacement) we recommend to check the mains
voltage of the supply line which, if found high or low compared with the rated values,
may cause problems due to a higher or lower delivery of current during the charge.
q As a result, check this value and adjust it, if needed, via the ADJUSTING PLUGS
placed in the terminal board on the transformer.
q Such control is to be carried out by qualified staff and/or by service centres.
WARNING
Connect the auxiliary
Transformer at 230V
WARNING
Connect the auxiliary
Transformer at 400V
To Next Page
Loading...
