9
1
2
10
3
4
5
6
7
8
11
13
12
14
Figure 1
15
Product Specifications
• Save all instructions
Parts & Features
Unit Weight .............................110 lb (50kg)
Tilling Width ....................... up to 21in (533mm)
Tilling Depths .................................up to 8”
Tine Diameter...........................11 in (279mm)
Gasoline Type .........Regular Unleaded/87 Octane (min.)
Gasoline Capacity ........................ 1.06 qt. (1 L)
Engine Oil Type (API SG-SL)..10W-30 is recommended for all
service temperatures. See page (10) for additional information.)
1. Tines
2. Swing Plate
3. Wheels
4. Wheel Bolts
5. Muffler
6. Air Filter
7. Recoil Starter Handle
8. Spark Plug / Spark Plug Wire
9. Drag Bar
10. Primer Bulb
11. Fuel Tank Cap
12. Oil Dipstick
13. Clutch Lever
14. Tine Shield
15. Outside Tine Shield
Engine Oil Capacity......................17 oz (500 ml)
Engine Type .............................
Engine Displacement .......... 139cc (EPA), 149cc (CARB)
Engine Speed............................... 3300rpm
Torque Rating ........... 5.0 ft-lbs (EPA), 5.9 ft-lbs (CARB)
gross torque per SAE J1940
Wheel Size .......................................8”
5
REFER TO ENGINE MANUAL FOR DETAILED ENGINE SPECS.
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2011 MAT Engine Technologies, LLC
To Next Page
Loading...
