Powermate PM400911 - Shutdown

200-2341 35
TT
TT
RR
RR
OO
OO
UU
UU
BB
BB
LL
LL
EE
EE
SS
SS
HH
HH
OO
OO
OO
OO
TT
TT
II
II
NN
NN
GG
GG
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
Low generator output voltage Low engine speed
• Verify correct engine speed. Remove excess
loads or adjust speed as required.
Excitation capacitor failure
• Contact a qualified generator dealer for service
assistance.
Generator diode or varistor failure
• Contact a qualified generator dealer for service
assistance.
Overspeed light stays lit
Shutdown due to high engine
speed
• Verify correct engine speed setting. Adjust
engine speed as required.
Underspeed light stays lit
Shutdown due to low engine
speed
• Reduce loads connected to generator
• Check engine speed setting at no load.
Adjust as required.
Overcrank light stays lit Failure to start • See "Engine cranks without starting"
Not In Auto light stays lit
Generator not set for unattended
operation
• Place mode switch into AUTO position if
automatic function is required
Low oil pressure light stays lit
Shutdown due to low engine oil
pressure
• Check engine oil level.
• Verify correct type of engine oil for ambient
temperature conditions
Low battery light stays lit Low battery • Test battery. Replace as necessary.
• Ensure charger is plugged into GFCI
receptacle
• Check for tripped GFCI receptacle. Reset if
required.
• Check for tripped breaker in branch circuit
supplying GFCI. Reset if required.
• Check all charger cable connections for
cleanness and tightness.
• Check battery charger inline fuse
• Check charger lights to verify correct
operation. See Table A, Page 29.
Blown charger circuit fuse • Check engine alternator fuse
High engine temperature light
stays lit
Shutdown due to high engine
temperature
• Allow engine to cool, then restart
• Decrease loads on generator
• Check enclosure openings for blockage
• Check oil cooler for blockage