Powermate PM401211 User Manual

© 2003 Coleman Powermate, Inc. 1-04
Stationary Standby Electric Generator - 11,000 WATTS - MODEL PM401211
Stationary Standby Electric Generator - 9,500 WATTS - MODEL PM400911
IMPORTANT SAFETY INSTRUCTIONS – Please make certain that persons who are to install, operate and maintain
this equipment thoroughly read and understand these instructions prior to operation. SAVE THESE INSTRUCTIONS
— This manual contains important instructions that should be followed during installation and maintenance of the
generator and battery.
Record the model and serial numbers of your generator below:
Model Number
____________________
Serial Number
____________________
Date Purchased
____________________
OWNERS MANUAL
MODELS: PM401211
AND PM400911
Read and understand all safety precautions in this manual and other
manuals included with this product before installing, operating and maintaining this
equipment. Failure to comply with instructions in this manual could result in personal
injury, property damage, and/or voiding of your warranty. Coleman Powermate WILL
NOT be liable for any damage because of failure to follow these instructions.
WARNING:
200-2341 - Revision B

Powermate PM401211 Specifications

General

Model	PM401211
Type	Portable Generator
Starting Watts	4000
Fuel Type	Gasoline
Starting System	Recoil
Engine Type	4-Stroke OHV
Frequency	60 Hz
Max AC Output	4000 W
Rated AC Voltage	120/240V
Fuel Tank Capacity	4 gal
Voltage	120/240V
Noise Level	68 dB

Summary

General Safety and Introduction

General Safety Guidelines

Essential safety warnings, symbols, and precautions for operation and installation.

Introduction and Planning

Overview of the generator, manual, unpacking, and installation planning.

Installation and Hookup Procedures

Generator Location Requirements

Guidelines for selecting a safe and proper site for generator placement.

Automatic Transfer Switch Integration

Explanation of transfer switch function and installation requirements.

Electrical Hookup Procedures

Detailed steps for connecting main power, GFCI, and start signals.

Fuel System Hookup

Connecting Natural Gas (NG) and Propane Vapor (LPG) supplies.

Operation and Controls

Battery and Initial Startup

Procedures for battery installation and initial generator startup.

Control Panel Features and Operation

Understanding control panel features, modes, and starting/stopping procedures.

Status Indicators and Faults

Interpreting indicator lights for generator status and error conditions.

Maintenance and Troubleshooting

Maintenance Schedule and Procedures

Periodic maintenance tasks, oil changes, and filter replacements.

Engine Oil and Filter Service

Steps for changing engine oil and replacing the oil filter.

Engine Air Filter Service

Procedures for replacing the engine air filter.

Spark Plug Check and Service

Steps for checking and servicing engine spark plugs.

Troubleshooting Common Issues

Diagnosing and resolving common generator problems and symptoms.

Specifications, Parts, and Support

Generator and Engine Specifications

Technical data for generator, engine, alternator, and electrical systems.

Parts Identification and Diagrams

Visual guides and lists for all generator components and replacement parts.

Warranty and Service Information

Details on warranty terms, exclusions, and how to obtain service.