1.
2.
3.
4.
5.
6.
7.
8.
9.
Before and during installation, DO NOT subject this appliance to an inclination of
greater than 45 to the horizontal, so as to prevent damage to the compressor and
refrigeration system of the appliance.
Clean the inside of the appliance with water & detergent with a non-abrasive
sponge. Ensure that the appliance is completely dry before use and standing at an
upright position for at least an hour before switching on the appliance. This will
reduce the possibility of malfunction of the cooling system which may have been
incurred during transportation.
This appliance should be installed in an environment free from explosive &
flammable substances, away from direct sunlight and sources of heat, on a
horizontal, stable and heat-resistant surface.
The appliance shall NOT be placed on a surface, or in the vicinity of, objects which
can be damaged by heat such as wood, carpets or plastics. If the appliance is
operated on wooden furniture, use a protective pad to prevent damage to delicate
finishes.
Place the appliance at a proper distance from objects or surrounding walls making
sure that its functioning will not cause accidental damages. There should be at least
10 cm of free space from the back, left & right sides and at least 30 cm from the top
of the door to allow adequate air circulation to cool the compressor. Never put
things on top of the appliance.
Before powering the appliance make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the appliance,
the wall socket is properly grounded and the power cable is undamaged. DO NOT
power the appliance using adapters and/or extension cables, external timers and/or
other remote control appliances.
Plug the power cable to the electric mains and switch it ON.
Upon switching on the appliance for the first time, turn the Temperature Control
Rotary Knob to 3. Check that the Indicator Light, Compressor and Ventilation Fan
are all working smoothly. After half an hour, the temperature inside the appliance
should already be cool, and gradually getting colder. Let the Compressor operate
for a period of at least 2 – 3 hours before placing food & drinks into the appliance.
If you need to switch the appliance off, make sure at least 5 minutes had elapsed
before switching the appliance back on in order to protect the compressor and the
refrigeration system.
HOW TO INSTALL
5
To Next Page
Loading...