Check to see whether the Temperature Control Rotary Knob is
set to 4.
External environment may require a colder temperature
setting above 4, e.g. 5.
The appliance’s Door was not closed properly or was opened
too often.
The appliance’s Door gasket does not seal properly. Send to
the authorised repair centre.
The appliance was not placed with clearances around it at
10 cm. There should be at least 10 cm of free space from the
back, left & right sides and at least 30 cm from the top of the
door to allow adequate air circulation to cool the compressor.
External environment is at a hotter temperature than normal.
A large amount of food has been added into the appliance.
The appliance’s Door was not closed properly or was opened
too often.
The appliance’s Door gasket does not seal properly. Send to
the authorised repair centre.
The appliance was not placed with clearances around it at
10 cm. There should be at least 10 cm of free space from the
back, left & right sides and at least 30 cm from the top of the
door to allow adequate air circulation to cool the compressor.
The appliance may not be level. Check whether the appliance
is placed on a horizontal and stable surface.
The appliance is
not cold enough
The Compressor
turns on & off
frequently
The appliance
vibrates excessively
The rattling and gurgling sounds may have come from the flow
of refrigerant inside the appliance. This is normal.
Contraction of the interior walls may result in ‘popping’ or
‘crackling’ noises.
The appliance may not be level. Check whether the appliance
is placed on a horizontal and stable surface.
The appliance
makes a lot of loud
noises
The appliance may not be level. Check whether the appliance
is placed on a horizontal and stable surface.
The appliance’s Door gasket is dirty or worn out. Clean the
appliance’s Door gasket or replace appliance’s Door gasket at
the authorised repair centre.
The appliance’s
Door will not close
properly
8
To Next Page
Loading...