EasyManua.ls Logo

Powerplus POWXG9008 - TECHNICAL DATA; NOISE; CLEANING AND MAINTENANCE; After each use

Powerplus POWXG9008
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWXG9008 EN
Copyright © 2015 VARO NV P a g e | 10 www.varo.com
12 TECHNICAL DATA
MOTOR
Engine power
3.5 kW
Rotation speed
3000 min-1
Fuel tank
3.6 l
Fuel
Unleaded gasoline / E10
Engine Type
OHV 4-stroke
Starting System
Recoil
Displacement
180 cc
Oil type
15W-30(SAE30)
WATER CONNECTION
Max. feed temperature
50 °C
Min. feed volume
626 l/h
Min. feed pressure
0.2 Mpa (2bar)
Max. feed pressure
1 MPa (10 bar)
Inlet hose length
≥ 3m
Inlet hose diameter (inner diameter)
≥ 12mm
PUMP
Working pressure
186 bar
Flow rate
522 l/h
Oil quantity - pump
65 ml
Detergent suck
4,2 l/h
Max. recoil force of hand spray gun
28 N
On board detergent tank
1.13 l
Weight without accessories
28 kg
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
90 dB(A)
105 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
2.1 m/s²
K = 1.5 m/s²
14 CLEANING AND MAINTENANCE
14.1 After each use
Shut off engine and turn off water supply. Release water pressure by pointing spray gun
in a safe direction and squeezing the trigger.
Disconnect high pressure hose, spray gun and nozzle. Drain water from items and use a
rag to wipe down the outside of the hose and spray gun.
Empty the water from the pump by pulling the recoil starter 6 times.
Store unit in a clean and dry area.