Why won't my PowerPro Technology 4050 start?
- RRyan JacobsonAug 1, 2025
Your PowerPro Technology Portable Generator might not start due to several reasons. Here's what to check: * The engine switch might be set to "OFF". If so, set it to "ON". * The fuel valve could be turned to "OFF". Turn it to the "ON" position. * The choke might be open; close it. * The engine could be out of fuel; add gasoline. * The engine might contain contaminated or old gasoline; change the gasoline. * The spark plug could be dirty; clean it. * The spark plug could be broken; replace it. * The generator might not be on a level surface; move it to a level surface. * The oil level might be low; add or replace the oil. * The air cleaner might be dirty; clean or replace it.


