2
3. PERSONAL SAFETY: Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do not use tool while tired
or under the influence of drugs, alcohol or medication.
A moment of
inattention while operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is off before plugging in. Carrying
tools with your finger on the switch or plugging in tools that have the switch on invites
accidents.
Remove adjusting keys or switches before turning tool on. A wrench or key
that is left attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection. Dust mask, non skid
safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
4. TOOL USE AND CARE:
Use clamps or other practical way to secure and support the workpiece to
a stable platform. Holding the work by hand or against your body is unstable and
may lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it was designed
.
Do not use tool if the switch does not turn it on or off.
Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventative
safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of the reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.
To Next Page
Loading...
