POWERSIDE PQube 3 - Installation Procedures; Turn off the Mains Supply Power at the Measurement Site; Choose a Suitable Location to Install Your Pqube 3 Portable 480 V

Page 8 of 12
Installation Procedures
1. Turn off the Mains supply power at the measurement site
Before working with mains AC voltage wires, always ensure the power is first disconnected. Powerside
recommends using a lock-out, tag-out system for safety.
2. Choose a suitable location to install your PQube 3 Portable 480V
Determine where you want to install your PQube 3 Portable 480V. Find a flat, level surface in a secure area,
accessible by authorized personnel only.
Your PQube 3 Portable 480V must be in the upright position during operation.
Optionally, you can hang it to a secure location using the included hook-and-loop strap.