GENERATOR PREPARATION
Remove Contents From Carton
Open carton completely by cutting each corner from top to bottom.
Remove and verify carton contents prior to assembly. Carton contents should
contain the following:
Accessories
Unpack the generator and all its parts, and compare against the list. Do not discard
the carton or any packaging materials. Please call 1-872-314-0005 or E-mail us at
support@amerisuninc.com /support@powersmartusa.com if any parts are
damaged or missing.
Assembly Instruction
CAUTION
Engine damage. Verify proper type and quantity of engine oil prior to
starting engine. Failure to do so could result in engine damage.
Adding Engine Oil
1. Place generator on a level surface.
2. Verify oil fill area is clean.
3. Remove oil fill cap and wipe dipstick clean.
4. Add recommended engine oil as shown in the
following chart.
NOTE: Use petroleum based oil (supplied) for
engine break-in before using synthetic oil.
Item Qty.
Main Unit 1
Owner’s Manual 1
Spark Plug Tool 1
Oil funnel 1
13
To Next Page
Loading...
