EasyManua.ls Logo

Powersmart PS76821 - Page 8

Powersmart PS76821
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Keep the mower and the charger away from water, heat sources (radiators, heaters, stoves,
etc.), flames, and chemicals.
Make sure the battery pack is secured in the charger before beginning operation.
The battery pack will become slightly warm to the touch while charging. This is normal and
does not indicate a problem.
Do not place the charger and battery pack in an area of extreme heat or cold. They will work
best at normal room temperature.
When batteries become fully charged, unplug the charger from the power supply and remove
the battery pack.
WARNING: When transporting or servicing unit, always remove the battery.
WARNING: Some dust created by power sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to the state of California to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
Lead from lead-basedpaints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treatedlumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemical: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.

Related product manuals