Powersmart PSSHD24 - Page 30

27
Problem
Causes
Remedy
Auger System
Auger belt broken,
or repeated failure
Auger tension pulley arm return
spring broken or missing Replace tension arm return spring
Auger tension pulley arm stuck or
binding Repair or replace tension arm as necessary
Auger tension pulley arm or
pulley
misaligned or damaged
Repair, replace or align tension arm and or
pulley as necessary
Foreign material on pulleys and
belt,
oil,
grease,
dirt
etc.
Clean belt and pulleys as necessary, replace
belt
if
necessary
Auger pulleys misaligned, loose,
damaged or bent Replace or align pulleys as necessary
Incorrect
or
damaged
auger
belt
Replace
with
correct
size
and
type
belt
Auger belt guide pin not adjusted
Adjust belt guide pin to within 1/8 to 3/16 in.
from pulley. (Guide pin keeps belt in pulley
when disengaged)
Auger rotating
when
auger control
handle released
Auger tension pulley arm return
spring broken or missing Replace tension arm return spring