PowerTec 71536 - User Manual

Owner’s Manual
Model No. 71536
24" Router Table Fence
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
Visit us on the web at powertecproducts.com
QUESTION...
1•847•780•6120
20-0616

PowerTec 71536 Specifications

General

Product Type	Sanding Belt
Model Number	71536
Brand	Powertec
Material	Aluminum Oxide
Belt Size	3 x 21 inches
Compatible Tools	Belt Sander
Type	Abrasive Belt

Summary

Safety Rules

General Safety Precautions

Operational Safety Guidelines

Read manual, understand tool use, follow all safety precautions for safe operation.

Tool Handling and Adjustment Safety

Turn off router before adjustments; ensure correct featherboard and bit guard placement.

Specific Safety Warnings

Router Bit and Workpiece Safety

Be aware of bit rotation, never feed between bit/fence, and use guides for control.

Pre-Operation Safety Checks

Ensure all knobs are tight, fence faces secured, and bit rotates freely without contact.

Adjusting the Fence Faces

Achieving Zero-Clearance

Adjust fence faces close to bit; move infeed face to touch bit for zero-clearance.

Zero-Clearance Setup Steps

Set bit height, position fence faces, install bit guard, adjust infeed face to bit.

Bit Guard Placement Caution