____________________________________________________________________________
Imported and distributed by Sadoun Satellite Sales,
www.sadoun.com 1-888-519-9595
Introduction
GBOX is a 2-in-1, full-function antenna positioner for motorized satellite antenna
systems. It can work as a traditional, DiSEqC1.2 positioner. Before installing the GBOX
DiSEqC positioner, please verify which type of satellite receiver you are using. You can
give each satellite position a name to help you easily find the satellite.
As a stand-alone positioner
If your receiver is not DiSEqC1.2 compatible, the GBOX will act as a standalone
positioner. The positioner will respond only to commands from the IR remote. No
connection between the GBOX and the receiver is needed.
As a DiSEqC 1.2 positioner
If the receiver is DiSEqC1.2 compatible, the GBOX will act as a DiSEqC positioner, and
the commands for the positioner (move, store, recall, set limit…) will come from the
receiver through the coaxial cable. Therefore, two coaxial cable links, one between the
receiver and GBOX, and one between the LNB and GBOX are needed. The IR remote
is not required in this case, although it can also control the positioner.
Front Panel:
Back View:
6 Digit LED Display
East Button
West Button
Power Button
To Next Page
Loading...
General