21
Cleaning & Storage
Clean the appliance after each use. The
Basket and Fry Tray are coated with
a special nonstick surface. Never use
abrasive cleaning materials or utensils
on these surfaces.
1. Remove the Power Cable from the
electrical outlet and be certain the
appliance is thoroughly cooled
before cleaning.
2. Wipe the outside of the appliance
with a warm, moist cloth and mild
detergent.
3. Clean the Basket and Fry Tray, with
hot water, a mild detergent, and a
nonabrasive sponge. The Fry Tray is
dishwasher safe, but hand-washing
is recommended. For difcult-to-
remove food, soak in hot, soapy
water for 10 minutes.
4. NOTE: If the Silicone Bumpers
on the Fry Tray need to be
cleaned, they can be removed
and reattached. To remove the
bumpers, locate the capped end of
the bumper and push the capped
end off of the Fry Tray. There will be
some resistance, but keep pushing
until the bumper slide off of the Fry
Tray. To reattach the bumper, slide
each bumper onto the slot on the
Fry Tray.
5. Clean the inside of the appliance
with hot water, a mild detergent,
and a nonabrasive sponge.
6. If necessary, remove unwanted food
residue from the heating element
with a soft cleaning brush.
7. Rinse the appliance with a clean,
damp cloth. Use a clean, dry cloth to
dry the appliance interior. Do not leave
standing water in the appliance.
8. If any other service needs to be
performed, contact Customer Service.
Place the cooled, dry appliance in a clean, dry place.
Do not stack objects on top of the appliance.
Storage
Cleaning
To Next Page
Loading...
