POYANK M10 - User Manual Operation

9
USER MANUAL OPERATION:
1. The input source selection.
Selecting an input signal from the device: (Confirm the correct signal cable is connected)
 Press to display the right interface.
 Confirm whether correctly connected to the signal cable press , from the PC, AV
HDMI, SD, USB choose you need to input signal.
 Press the key to determine the input signal types.
2. Manual Operation.
1) Select the menu language:
 Press button of language options into the interface.
 Press the button, select the language you need and then press
button to accept Settings and exit.
2) Image model:
 Press button shows the right page of the image mode interface.
 Press the button, choose the items you need o adjust, and then press
button to adjust the values of the parameters of the options.
 After complete the adjustment, press button to save Settings and exit.
(Standard → Soft → User → Dynamic)
3) Color temperature:
 Press the button, select a color temperature, and then press display on
the right side of the interface.
 Press the button, choose the items you need yo adjust, and then press
button to adjust the values of the parameters of the options.
(Standard → Warm Color → User → Cool Color)