POYANK M10 - Remote Control Introduction

5
2. Remote Control Introduction.
 Between the remote control and remote control receiving host window please do not put any
items, In order to avoid blocking the signal.
 Please point the remote control to the left side of the projector or the projection screen, to
receive the Infrared Radiation.
 Please do not make the light point-blank main engine remote control receiving window to
prevent remote signal is invalid.
 The former straight to the main engine remote control of the remote control receiving window,
about 30 degrees at 6 meters distance within the scope of operation, otherwise, may not
receive the signal.
 Such as long-term when not in use please take out the battery, remote control to prevent
battery leakage corrosion.
 After the battery used long, if found remote control cant work properly please replace new
battery.
 Do not put the remote control in high temperature or damp places, in order to avoid damage.