16
4. Make sure that any loose-fitting jewelry
or clothing is secured and tie back long
hair as they can get caught in moving
parts during installation.
5. If the antenna assembly starts to fall, get
away from it and let it fall to avoid
harming yourself.
• When drilling remember:
1. Use safety goggles when drilling the
holes.
2. Avoid using bits that are dull, bent, or
damaged.
3. Be aware of where your fingers are to the
drill bit when using the drilling machine.
4. To stop the drilling machine, let the drill
chuck come to a complete stop on its
own. Do not grasp the chuck to stop the
drill bit.
5. Avoid awkward hand positions where a
sudden slip could cause a hand to move
into the drill bit or cutting tool.
CAUTION:
Antennas must be installed to provide a separation
distance of at least 20cm from all persons to
comply with SAR (Specific Absorption Rate) RF
Exposure requirements.
European Waste Electronic Equipment Directive
2002/96/EC
Please ensure that old waste, electricals.
and electronics are recycled.
Directive 2011/65/EU (RoHS 3)
This product is fully compliant with the RoHS 3
directive.
To Next Page
