To Next PageTo Next Page
Need help?Do you have a question about the Poynting XPOL-2-5G and is the answer not in the manual?
General| Gain | 10 / 11 dBi |
|---|---|
| Impedance | 50 Ω |
| Frequency band | - GHz |
| Antenna gain level (max) | 11 dBi |
| Mounting | Wall/Pole |
| Antenna type | Directional antenna |
| Product color | White |
| Housing material | Acrylonitrile styrene acrylate (ASA) |
| Survival wind speed | 250 km/h |
| Antenna connector type | SMA |
| International Protection (IP) code | IP65 |
| Voltage Standing Wave Ratio (VSWR) | 1.5.1 |
| Mounting kit | Yes |
| Operating temperature (T-T) | -40 - 80 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 0 - 98 % |
| Sustainability certificates | CE, RoHS |
Weight and Dimensions| Width | 265 mm |
|---|---|
| Height | 90 mm |
Steps for mounting the antenna on a pole, including clearance requirements.
Instructions for attaching the antenna to a wall using the Z-bracket and appropriate fixings.
Steps to locate the cellular tower and point the antenna's main beam for optimal signal.
Method for fine-tuning antenna position by rotating it for the best signal reading.
Important considerations to ensure proper and safe antenna placement, avoiding interference.
Best practices for running antenna cables to minimize losses and ensure secure connections.
Advice on hiring professionals, surveying sites, and general precautions during installation.
Specific safety guidelines to follow when using drilling machines for installation.
Reminders on avoiding distractions, securing clothing, and handling potential falling objects.
Information on required separation distance for SAR compliance and product certifications.
