Need help?Do you have a question about the Poynting PUCK-5 and is the answer not in the manual?
General| Radiation Pattern | Omni-directional |
|---|---|
| VSWR | < 2.5:1 |
| Polarization | Linear |
| Impedance | 50 Ohm |
| Operating Temperature | -40°C to +80°C |
| Ingress Protection | IP68 |
| Cable Length | 2 m |
| Frequency Range | 698 - 960 MHz, 1710 - 2700 MHz, 3400 - 3800 MHz |
| Mounting Type | Magnetic, Adhesive |
| Antenna Type | Multiband omnidirectional |
Instructions for mounting using a threaded spigot, including drill templates and surface preparation.
Steps to attach the antenna base and secure it with screws and nut after mounting the spigot.
Instructions for attaching the magnetic base for surface mounting and routing the cable.
Details on attaching the magnetic base to the antenna and placing it on a magnetic surface.
Steps for attaching the antenna using an adhesive seal on a magnetic base.
How to attach the antenna bracket to a pole using screws and securing it with ties/clamps.
Specific instructions for internal and external pole mounting methods using brackets.
Guide to mounting the antenna on a wall using a bracket, including drilling and screw placement.
To Next Page
