EasyManua.ls Logo

PPC PPC-N29TP User Manual

Default Icon
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PPC-N29TP
ULTRASONIC STENCIL
CLEANING SYSTEM
Operator’s Manual
(Rev. 3 September 2008)
PresSure Products Company, Inc.
4540 Washington Street, West
Charleston WV 25313-2010
(800) 624-9043
(304) 744-7871
Fax: (304) 744-6705
www.pressureproducts.com
Question and Answer IconNeed help?

Do you have a question about the PPC PPC-N29TP and is the answer not in the manual?

PPC PPC-N29TP Specifications

General IconGeneral
BrandPPC
ModelPPC-N29TP
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Summary

Introduction

I. Machine Description

II. Principles of Operation

II.1 Tank

Describes the dual-compartment stainless steel tank system.

II.2 Filters

Details the two filtration systems and their components.

II.3 Ultrasonic Generator

Explains the function and specifications of the ultrasonic generator.

II.4 Dryer

Describes the drying chamber, fan, heating element, and safety features.

II.5 Control Panel

Details the features and operation of the operator control panel.

II.6 Part Support Arm

Explains the machine's capability for handling stencil frames.

II.7 Safety Disconnect Switch

Describes the safety disconnect switch and its lockout provision.

III. PPC-N29TP Operation

III.1 Recommended Cleaning Fluid

Recommends Zestron Vigon SC200/SC210 and provides usage guidelines.

III.2 Filling Procedure

Step-by-step guide for filling the machine with cleaning fluid.

III.3 Starting the Machine

Step-by-step instructions for powering on and initializing the machine.

III.4 Running an Automatic Cycle

Detailed steps for executing an automatic cleaning cycle.

III.5 Dryer Cycle

Procedure for operating the machine's drying function.

III.6 Manual Functions

Instructions for using manual controls and special modes.

IV. Maintenance

Filters

Information on filter maintenance and replacement.

Filter Change Procedure

Step-by-step guide for replacing filter cartridges.

Pressure Switch Adjustment

Procedure for adjusting pressure switches for filter monitoring.

Draining the Cleaning Fluid

Instructions for safely draining the machine's cleaning fluid.

V. General Specifications

VI. Vigon Technical Data Sheets and MSDS