EasyManua.ls Logo

PPE MFT1230C - Power Connection

PPE MFT1230C
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
e-mail: sales@ppe.com
W
6385 MONTESSOURI STREET
LAS VEGAS, NEVADA 89113-1186
TOLL FREE: 800
-
258
-
8877
Order Fax: 800-223-8305
Note: when the machine service temperature is less than or equal to 200 ° C, Teflon pipe with
temperature resistance of 200 ° C can be used
When the operating temperature of the machine is 200 ° C ~ 300 ° C, the Teflon pipe with
temperature resistance of 300 ° C must be used.
2.3 POWER CONNECTION
Verify that the connected power supply matches the required specification, and then connect
the power supply.
Cooling water inlet
Cooling water outlet
Mold export
Mold entrance
8