Pramac LUCE MCPH P7 - Page 11

ENGLISH 11

Importantnotice

RISK
Donotpaintorapplyadhesivestothemodules(especiallyonthefrontglass).

RISK
Eachmodulemaygeneratevoltageinexcessof100V
DC
onceexposedtoasource
of direct or indirect light. Be careful during module handling or wiring if the
modulesareexposedtosunlight.Donotwearringsormetalobjectsduringpanel
installationormaintenance.

RISK
Do not use mirrors or other artificial methods aimed at amplifying and
concentrating
lightonthemodules.

RISK
Donotwalkonthesurfaceofthemodule.

RISK
Modules must always be handled by 2 persons. Inappropriate
handling may damage the product, mainly the glass surface.
Neverliftthemodulepullingthewires.Donotinstallorhandle
moduleswhentheyarewet,noronextremelywindydays.

RISK
Do not rest heavy objects on the surface of the module. The
maximum load that modules may bear is 2400 Pa (about 250
kg/m
2
).


photovoltaikforum.com