Pramac LUCE MCPH P7 - Installation Instructions; Preliminary Operations

ENGLISH 10

InstallationInstructions

Preliminaryoperations
 Checkpackaging!Pleasecheckcontentsifboxisvisiblydamaged.Checkcables,connectors
andthemoduleonbothsidesfordamages.Donotinstalldamagedmodules.

 Maximumcaremustbeusedduringproducttransportation,storageandunpacking.Ifthe
modulesmustbetemporarilystored,keepthemina
dryandventilatedenvironment.

 The installer or purchaser are responsible for choosing the location where the structure
andsupportsaretobemountedandforpreparingtherelativelayout.

 Duringmoduleinstallation,pleaserespectalllocal,regionalandnationalapplicablesafety
regulations,includingconstructioncodesandregulations,where
required.

 Useappropriatesafetyequipment(insulatedtools,insulatedgloves,etc.),approvedforuse
onelectricequipmentandsystems.

 Pleasefollowallinstructionsandcomplywithallsafetyprecautionsprescribedforallother 
componentsusedinthesystem.

 Onlyuseequipment,connectors,cablesandassemblysuitedforaphotovoltaicsystem.











photovoltaikforum.com